Maintenance and maintenance of plastic extrusion machinery

Plastic machinery in action "for plastic machinery maintenance. The maintenance and maintenance according to certain rules to operate. So to mechanical equipment operation. At the same time, according to the relevant requirements of equipment performance of the corresponding security technology to maintain" can effectively ensure the equipment and personnel of the maximum security.
To carry out maintenance. The plastic machinery maintenance and maintenance according to certain rules to operate. So to machinery and equipment operation. At the same time, according to the relevant requirements of equipment performance of the corresponding security technology to maintain "can effectively ensure the safety of equipment and personnel to the maximum.
1, regularly check the lubricating oil tank and tank fuel tank is sufficient. Check the lubrication system reliability. In accordance with the provisions of the moving parts are lubricated.
2, regularly check the pipeline leakage and fastener fastening condition.
3, plastic machinery and equipment often check the safety device of the machine is normal and effective. Especially after the replacement of the mold to check the mechanical insurance is adjusted accordingly. Regularly check the connection of the ground wire and the insulation of electrical components and the aging of the wires.
4, regularly check the oil filter or packing case. Timely cleaning and replacement. Always pay attention to whether the contaminated oil and deterioration. When the hydraulic oil and brown stink. When is the oxidation performance "should be updated as soon as the hydraulic oil; when the hydraulic oil in a small black or transparent highlights. The impurities or metal powder mixed with oil or should be filtered.
5, the cooler every 5 to 10 months with carbon tetrachloride solution for cleaning.
6, screw, barrel and other important parts of the maintenance shall be carried out according to the specification.
7, before the installation, inspection, preparation from various components ". For each equipment parts for inspection. Inspection of the main steel structure. The bearing bolts. At the same time. On the surface of the parts for corrosion. This is to make a record for" after inspection before installation.
8, plastic machinery for the delivery of equipment maintenance
The normal operation of equipment. According to the rules and regulations to carry out daily and regular maintenance, and daily maintenance is mainly responsible for cleaning, fastening, lubrication, adjustment, anti-corrosion. This is to check every day "and regular maintenance. At the time of the mechanical equipment maintenance and repair several times" with the cleaning, lubrication, adjustment, and maintenance of central contents of disintegration.